Partnering opportunities

Carbon companies looking to collaborate

Business and academia from UK and around the world looking to partner to co-develop carbon technology. We can connect you.

We help ambitious, post-start up businesses, to

  • Move into new markets
  • Access funding
  • Use our networks
  • Innovate to grow
  • Find trusted partners
Innovate UK
HM Government
European Commission

Start new search

61 total opportunities

Filter your results

I’m looking for a partner...
Country of origin

{[{ | number }]} opportunities

61 opportunities

Get updates to this list

The search results below each have a summary which you may find useful in determining if the opportunity is what you’re looking for.

{[{ row.title }]}

{[{ row.summary }]}

Country of origin {[{ }]}

Аdsorptive carbon dressing on the base of activated carbon fibrous materials

The technology was developed in Ukrainian academic research center, which was established in 1960 and is a part of Ukrainian Academy of Sciences The dressing represents an activated carbon fiber material with... more


Selective capture of carbon disulfide and other toxic compounds

Carbon disulfide (CS2) and other similar substances such as carbonyl sulphide (COS) are very toxic. CS2 is commonly used at the chemical industry and the elimination of its products and effluents is important.... more


Carbon fibres pots, pans, or dishes for induction hobs

composite fibre materials, e.g. carbon fibre, approved for food and beverage contact (surface coating obtained the FDA approval for the contact with fod and beverages (USA - Food and Drug Administration). Such... more


Carbon derived nanomaterials for pseudo and supercapacitors, batteries and fuel cells

A Spanish company designs, optimizes and manufactures advanced materials (carbon-based electrode materials) for energy storage systems, through a proprietary nanomaterial development platform. The team counts with... more


Rolled unidirectional tape of dry carbon fibres for light-weight applications

A German research institute, active in textile engineering, has developed a process including a pilot plant for demonstration. The increasing use of carbon fibre materials, e.g. in airplane and automotive engineering,... more


Composite bio-compatible material on the basis of titanium alloys and vitreous carbon coating intended for endoprosthesis

layer of vitreous (nascent) carbon, which is also proven to be bio compatible, on the titanium matrix neutralises the biochemical corrosion. The fabrication of the hip joint or other endo-prosthesis can be made... more


Production of boron, carbon and nitrogen compounds with unique properties for new materials

Bulgarian company is working in the field of research and manufacturing of new materials and products using significantly improved chemical compounds. The main properties of six compounds have been studied in detail: boron carbide (B4C), titanium... more


Rapid deposition of carbon nanowalls (almost 1 µm/s) for fuel cells and batteries

Carbon nanowalls (often called “vertically oriented multilayer graphene sheets") are materials of carbon-containing structures with a thickness up to several nm and height between... more


Ukraine research institute is offering technology of the equipment for the production of activated carbon of high quality.

technology fundamentals creation of atmosphere air protection from pollution, thermal neutralization of solid domestic waste and specially dangerous materials and wastes. Technology for the production of activated carbon... more


Biodegradability test: Determination of aerobic biodegradability of plastic materials or residual plastic materials by measuring the amount of carbon dioxide evolved.

biodegradability of plastic materials or residual materials in soil or in contact with mature compost by measuring the amount of carbon dioxide evolved. This test method is designed to rate the biodegradability... more


H2020: The Ukrainian manufacturer of carbon materials and products, is looking for partners to test a new generation EF-68 graphite-polymer universal material for electric motor brushes

etc. Based on 25 years of experience in the production of carbon materials by the company, a new technology for creating a brush graffiti-polymer material EF-68 was developed jointly with the leading enterprises... more


A Korean institute is offering an eco-friendly and low-cost CFRP (carbon fiber reinforced plastics) recycling technology for technology transfer.

process contain high-volume carbon fiber that is expensive. If they are not to be recycled, it would be a waste of high-priced useful resources as well as it would cause environmental pollution. However, there... more

South Korea

Handheld and stationary gas leak detectors for quick and highly-selective detection of gases like methane, propane, carbon dioxide, hydrogen, ammonia and refrigerants for applications in buildings, installations, automotive, energy and safety plants.

(Pt) thin-film technology. The handheld and stationary gas leak detectors are selective for methane (CH4), propane (C3H8), carbon dioxide (CO2), hydrogen (H2), ammonia (NH3) and refrigerants to identify potentially... more


Aerographite: A high-performance graphene-based functional material with tunable mechanical, electrical, thermal, and chemical properties for application in the chemical and energy sector, electronics and biomedical applications

Aerographite is a graphene-based open pore carbon foam with extremely high porosity, very low density, and high specific surface. A German research group has developed a novel synthesis process for this more


Powerful composite sorbent for the removal of contaminants from water

materials which are annually produced in billions of tons by nature (resulting in a significant reduction of production costs of the sorbent). The resulting nanoporous carbon fibers are modified with hydrated... more


Composite Coating of Chromium and Nanodiamonds

cracks and pores in it. The hardness of the surface is increased from 250 MPa for carbon steel C45 to 11500 MPa for the chromium coating modified with nanodiamonds. And also the wear resistance of this coating... more


Heparin albumin containing adsorbents for hemoperfusion

The technology was developed in Ukrainian academic research center, which was established in 1960 and is a part of Ukrainian Academy of Sciences Preliminary studies on development of heparin- protein-carbon adsorbent... more


An established Slovak research institute has developed new polymer composites for 3D printing and is looking for licensees or investors

polyethylene terephthalate. Furthermore, this fact did not reflect in the properties of the resulting 3D object. For the purposes of improving the mechanical properties (static and dynamic) and reducing the weight of the final product, more


Cold end gas condenser design and manufacturing for combustion fumes heat recovery in waste-to-energy plants.

operation specifications in order to develop the final formulation of an advanced carbon steel tubes coating to be applied in fume heat recovery installations. After technical studies carried out in the laboratory,... more


Eurostars2: Partners sought to cooperate in research on inspection and laser utilization device.

this company want to expand their partner relationships over Europe, especially specialized to laser processing technology and carbon nanotube technology. more

South Korea

The right partner not here?

Get in touch and we'll help you post a partnering opportunity